RF Line Components

Connectors

The RNS range of connectors offer many built-in advantages such as an expanding inner conductor for improved electrical performance, longer body construction for reduced stress on the cable and advanced weather protection IP64 which completely eliminates the need for weatherproofing, all of the products have been tested in the most extremes of climatic conditions from minus 40 degrees to plus 50 degrees.

Our connectors are fast and easy to install and are fully compatible with all major brands of cable available in the market, available for 1/2, 7/8, 1 1/4, 1 5/8 and 2 ΒΌ cables in N and 7/16 configurations.

Jumper Cables

Pre-Assembled in any length required our Jumper cables are waterproof down to 25mtrs equivalent to 2.5 bar which exceeds the requirement for IP68. Consequently there is no need for any additional weather proofing during installation. Every cable is factory tested and its return loss measured within the 0 to 2.2 GHz range, the results are then labeled to each individual assembly. Our jumper cables have no soldered parts.

Grounding Kits

The unique design enables multiple kits to be installed very close to each other, these kits have a simple adjustment which allows for easy fitment to a wide range of cables, they are re-usable and 100% weather proof, tested with a lightning pulse of 50Ka, 10/35 ms you can be assured of equipment protection. The external grounding kit is designed to be mounted around the shoulder of the connector which effectively makes the connector the grounding device, easy to install they provide additional protection at the feeder connector.

Cable Clamps

Our Cable clamps are manufactured from corrosion resistant stainless steel and are designed to achieve a perfectly distributed amount of pressure on the cable. Available for use on flat, angle and round tower members as well as wall mount. Our clamps are light and easy to install.